Request a quote
Get a Quote for Engine Filters
Email and phone are required. Leave anything you don't know blank.
Menu
Menu
Cummins Air Filters
Fleetguard AF26204 Primary Air Filter
A primary (outer) air element listed for Iveco Cursor applications such as the EuroTrakker, EuroStar, Stralis and Tector. Whether it suits your machine depends on the machine or engine build and the complete number on the element you are removing, not on the part number alone.
- Part number
- AF26204
- Type
- Primary (outer) air element
- Engine reference
- Iveco Cursor applications
What the AF26204 Is
AF26204 is a primary (outer) air element. It sits in the air-cleaner housing and carries the bulk of the intake dust load. Fleetguard lists it as axial-seal with cellulose media. The seal is part of the specification: an axial-seal element seals against the end face of the housing, and a radial-seal element of similar size will not seat the same way.
It is not the safety element. AF26245 fits inside it, and the two are separate lines. A quotation should state which lines it covers.
Machine or engine build
Provide the machine or engine maker, model and full serial or build number. The model name alone does not confirm fitment.
Seal type: axial or radial
Confirm the housing seal face. An axial-seal element and a radial-seal element of similar size do not seat the same way.
Complete old part number
Send the full number printed on the removed element, including any suffix. If the records disagree, send all of them for review.
AF26204 Specifications and Confirmation Table
We publish only the fields that agree across the records we can check. Height is withheld because listings conflict: 466 mm, 480 mm and 483 mm all appear. Efficiency and service interval are also withheld; the figures in circulation are reseller claims without a manufacturer document behind them. Those values are confirmed against the manufacturer specification for your machine and stated in your quotation. A dimensional match alone does not confirm the seal, the media or the flow. Send the complete old number and we will check the offered item line by line.
| Check | Value to compare | How to confirm |
|---|---|---|
| Type | Primary (outer) air element | Confirm against the old element |
| Seal | Axial seal | Match the seal face |
| Media | Cellulose | Confirm on the offered item |
| Largest outside diameter | Roughly 327 mm | Measure the old element |
| Inside diameter | Roughly 218 mm | Measure the old element |
| Overall height | Not published; listings conflict | Confirmed per quotation |
| Safety element | AF26245 | Confirm separately; not AF26400 |
| Reported applications | Iveco Cursor trucks; some Case IH and Fiat machinery | Confirm by machine record |
Swipe horizontally to view all columns.
AF26204 and AF26245: The Pair
AF26204 is the outer element, roughly 327 mm across. AF26245 is the inner safety element, roughly 200 mm across. The size difference is the quickest visual check: the safety element fits inside the primary, not beside it. The primary removes the bulk of the dust; the safety element guards the clean side if the primary is damaged or removed during service. Never run the engine on the safety element alone, and do not clean it to extend its life.
| Brand | Candidate pair (primary with safety) |
|---|---|
| Donaldson | P787157 with P787247 |
| Mann-Filter | C331465/1 with CF2100/1 |
| Hengst | E433L with E433LS |
| Baldwin | PA5364 with PA5365 |
A pair is a candidate set, not a fitment statement. State both lines separately in the enquiry; if you have the old numbers, send them for checking.
Iveco and Other Reported Applications
Start with the machine record, not the catalogue label.
Iveco Cursor 13 / EuroTrakker / EuroStar / Stralis / Tector
Listed for Iveco Cursor applications, with some listings also naming Eurocargo, Daily, Case IH and Fiat/Case machinery. Treat these as reported applications, not a fitment chart. The machine build decides.
Iveco 2991785, 2992374, 2996155 and 41272211 are reported as the same element under successive references. No formal supersession document was found — confirm the active number against the machine record.
Fleetguard is a Cummins brand, but AF26204 is not listed as a Cummins engine element. Catalogue labels (Cummins, MAN, Sakura) are not fitment.
How an AF26204 Order Is Quoted
Three records: the machine or engine build, the installed position (primary or safety, and housing), and the complete number off the old element. We check each line, then state the offered item, maker, complete number, quantity and delivery terms.
No real-time stock feed. If building a service list, add AF26204 and AF26245 as separate lines.
Request a QuoteFrequently Asked Questions
Is AF26204 a primary or secondary air filter?
AF26204 is the primary (outer) element. Its safety element is AF26245. AF26400 is a different safety element, paired with AF26399. Confirm both numbers and the machine build before ordering.
What is the difference between AF26204 and AF26245?
AF26204 is the outer primary; AF26245 is the inner safety element. They do different jobs, are different sizes and are not interchangeable. The safety element is a guard, not a substitute for the primary.
Is AF26204 the same as AF26400?
No. AF26400 is a safety element for the AF26399 primary, listed on agricultural and construction equipment. It is not AF26204’s safety element, and the two are not a pair.
Does AF26204 come with the safety element?
They are separate lines. The primary and the AF26245 safety element are quoted separately unless the quotation says otherwise. State whether you need both.
What Iveco part number is AF26204?
2991785, 2992374, 2996155 and 41272211 are reported as the same element under successive references. Confirm the active number against the machine record; no formal supersession document was found.
Is Fleetguard AF26204 a Cummins filter?
Fleetguard is a Cummins filtration brand, but AF26204 is listed for Iveco applications, not Cummins engines. The brand name is not a fitment statement. Confirm the engine or machine.
Confirm the Number, Then Confirm the Machine
Send the machine model, the number printed on the element you are removing, and whether you also need the safety element.
We will confirm the offered item, maker, complete number and terms.